Armoloq TPA-710
*Base Package includes the TPA protective mounting frame only. All other components and packages are sold seperately.
Please refer to the photos to see where 12 in. length cables land on the TPA. Longer cables can be sourced through HRO, DXE, Amazon, etc.
The USB-B Relocation Package will be available July 2024.
Alternate RF components and packages can be found on the Optional Components and Packages page.
Pack info- sold separately
5.11 Rush 12 2.0
The TPA pack frame is a 2 piece frame that is secured via the radio's 8 case screws. The frame is CNC laser cut from 5052 aluminum and powder coated with a matte black finish. The TPA provides protection to the radio body and control head with a wrap around design, while allowing access to all controls. Repositioning of the rear connections to the front provides easier access and faster setup in the field.
Note- the rubber pads at the bottom rear of the radio will need to be removed in order to install the TPA. The 4 foam pads on either side of the radio can be removed or left in place; they will be compressed as you fasten the TPA to the radio.
Dimensions
Length - 14.375 in
Depth - 4.000 in
OAW, to include radio- 10.250
Weight, TPA only- 2.1 lbs
Relocation Mounts are 1 inch in depth and will add an additional 1-2 inches to overall depth, depending on placement.
Materials
Frame- 5052 aluminum, 1/8"
Finish- powder coat, matte black
Base package includes the following-
TPA-710, 2 piece pack frame
M3 x 10mm socket head screws- 8, these mounting screws are the appropriate length to avoid damaging the radio's internals. Not to be installed without TPA pack frame.
