The Armoloq DDM-MBLNKD is a mounting platform for securing the Mobilinkd TNC to your Armoloq TPA. It’s manufactured from .080 Kydex thermoplastic in a sleeve style design. Retention is obtained thru compression, as well as hard stops at the top and bottom, preventing the Mobilinkd from shifting up or down when plugging in or removing connections. The DDM is designed with a raised front cavity to prevent the Mobilinkd from being powered on from external pressure, while maintaining a slim profile.
Fits the following Mobilinkd versions-
* You will not need the Data Relocation Package if you're running the Mobilinkd affixed to your TPA. The suggested installation is to utilize the appropriate cabling offered from Mobilinkd for your radio and dress the excess cable into the open area at the rear of the TPA.
Secure the DDM-MBLNKD to the TPA with the included hardware.
Slightly open the upper section of the DDM-MBLNKD.
Place the Mobilinkd in the top and begin pressing the unit downward into the mount until it passes the top stops and snaps into position.
Disconnect all connections.
Slightly open the upper section of the DDM-MBLNKD and push the Mobilinkd past the top stops.
Wt. w/o Mobilinkd- 1 oz
Wt. w/ Mobilinkd- 2.75 oz
Colors available- Matte Black
Hardware included- 2, M4 x 0.70mm socket head screws and 2 nuts.