TPA-300, Base Package

In stock. Orders will ship within 2 business days.
Adding to cart… The item has been added

The TPA-300 also fits the Yaesu FTM-200DR


*Base Package only includes the items listed in the description below

*Does not include rear RF adapters or coax.  RF adapters and coax can be sourced thru various online vendors. 

The TPA-300 was designed to be as short as possible. 

Suggested components-

PL-259 male to BNC female, right angle adapter

RF Cable- BNC male, straight connector to BNC male, straight connector, 1ft



* Digirig users- You will not need the Data Relocation Package if you're running the DigiRig affixed to your TPA.  The suggested installation is to utilize the appropriate cabling offered from DigiRig for your radio and dress the excess cable into the open area at the rear of the TPA.

*The Yaesu CT-164 data cable will be required for use with the Data Relocation Package.


The TPA pack frame is a 2 piece frame that is secured to the radio via 8, side chassis mounts.  The frame is CNC laser cut from 5052 aluminum and powder coated with a matte black finish.  The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.



Length - 9.000 in

Radio Body Depth  - 2.625 in

Radio Control Head Depth - 3.000 in

Weight - .716 lbs

Relocation Mounts are 1 inch in depth and will add an additional 1-2 inches to overall depth, depending on placement. 



Frame- 5052 aluminum, 1/8"

Relocation mounts- 6061 aluminum


Base package includes the following-

TPA-300, 2 piece pack frame

M2.6-0.45 x 8mm socket head screws- 8, these mounting screws are the appropriate length to avoid damaging the radio's internals.  Not to be installed without TPA pack frame.

Relocation mount and mounting hardware- 1

BNC female bulkhead connectors- 1