*Base Package only includes the items listed in the description below
*Does not include rear RF adapters or coax. RF adapters and coax can be sourced thru various online vendors.
PL-259 male to BNC female, right angle adapter
RF Cable- BNC male, straight connector to BNC male, straight connector, 1ft
PL-259 male to BNC female, straight adapter
RF Cable- BNC male, right angle connector to BNC male, straight connector, 1ft
RF Cable- PL-259 male to BNC male, 1ft
PLEASE REFER TO THE WEBSITE FOR ADDITIONAL PHOTOS
* Digirig users- You will not need the Data Relocation Package if you're running the DigiRig affixed to your TPA. The suggested installation is to utilize the appropriate cabling offered from DigiRig for your radio and dress the excess cable into the open area at the rear of the TPA.
The TPA pack frame is a 2 piece frame that is secured to the radio via 4, side chassis mounts. The frame is CNC laser cut from 5052 aluminum and powder coated with a matte black finish. The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.
Length - 11.250 in
Depth - 3.250 in
Weight - .940 lbs
Relocation Mounts are 1 inch in depth and will add an additional 1-2 inches to overall depth, depending on placement.
Frame- 5052 aluminum, 1/8"
Relocation mounts- 6061 aluminum
Basic package includes the following-
TPA-7000, 2 piece pack frame
M4-0.7 x 10mm socket head screws- 4, these mounting screws are the appropriate length to avoid damaging the radio's internals. Not to be installed without TPA pack frame.
Relocation mount and mounting hardware- 2
BNC female bulkhead connectors- 2