* Digirig users- You will not need the Data Relocation Package if you're running the DigiRig affixed to your TPA. The suggested installation is to utilize the appropriate cabling offered from DigiRig for your radio and dress the excess cable into the open area at the rear of the TPA.
This TPA fits the following radios-
Icom IC-706 all flavors, IC-703
Base package includes the following-
TPA-706, 2 piece pack frame
M4-0.7 x 10mm socket head screws- 4, these mounting screws are the appropriate length to avoid damaging the radio's internals. Not to be installed without TPA pack frame.
RF PnP Package, TNC/RA2 consists of the following components-
PL-259 to BNC female, straight adapter- 1
BNC right angle to TNC female bulkhead, terminated to RG58C/U, 1ft- 1
TNC male to BNC Female adapter- 1
Relocation mount with hardware- 1
The TPA pack frame is a 2 piece frame that is secured to the radio via 4, side chassis mounts. The frame is CNC laser cut from 5052 aluminum and powder coated with a matte black finish. The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.
Dimensions
Length - 12.250 in
Depth - 3.000 in
Weight - 1.0 lbs
Relocation Mounts are 1 inch in depth and will add an additional 1-2 inches to overall depth, depending on placement.
Materials
Frame- 5052 aluminum, 1/8"
Finish- powder coat, matte black