Skip to main content

Armoloq TPA-857B

If the "Add to Cart" button is not present, this unit is out of stock. In stock items ship within 2 business days.
Adding to cart… The item has been added

* Digirig users- You will not need the Data Relocation Package if you're running the DigiRig affixed to your TPA.  The suggested installation is to utilize the appropriate cabling offered from DigiRig for your radio and dress the excess cable into the open area at the rear of the TPA.


Base package includes the following-

TPA-857B, 2 piece pack frame

M4-0.7 x 10mm socket head screws- 4, these mounting screws are the appropriate length to avoid damaging the radio's internals.  Not to be installed without TPA pack frame.


RF PnP Package, TNC/RA2 consists of the following components-

PL-259 to BNC female, straight adapter- 1

BNC right angle to TNC female bulkhead, terminated to RG58C/U, 1ft- 1

TNC male to BNC Female adapter- 1

Relocation mount with hardware- 1


The TPA pack frame is a 2 piece frame that is secured to the radio via 4, side chassis mounts.  The frame is CNC laser cut from 5052 aluminum and powder coated with a matte black finish.  The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.


Length - 13.250 in

Depth  -  2.750 in 

Weight, approx.- .750

Relocation Mounts are 1 inch in depth and will add an additional 1-2 inches to overall depth, depending on placement. 



Frame- 5052 aluminum, 1/8"

Finish- powder coat, matte black