Skip to main content

Armoloq TPA-891B

If the "Add to Cart" button is not present, this unit is out of stock. In stock items ship within 2 business days.
Adding to cart… The item has been added

* Digirig users- You will not need the Data Relocation Package if you're running the DigiRig affixed to your TPA.  The suggested installation is to utilize the appropriate cabling offered from DigiRig for your radio and dress the excess cable into the open area at the rear of the TPA.


Base package includes the following-

TPA-891B, 2 piece pack frame

M4-0.7 x 10mm socket head screws- 4, these mounting screws are the appropriate length to avoid damaging the radio's internals.  Not to be installed without TPA pack frame.

*Included in the hardware pack are 2 additional washers.  In order to maintain the ability to remove the control head while the TPA is installed, you’ll need to place these 2 washers between the TPA and radio body on the VFO side.  The TPA should not be installed without these 2 washers in place as they prevent lateral pressure from being applied to the control head.


RF PnP Package, PL-TNC/RA

This package includes the following components-

PL-259 right angle to TNC female bulkhead, terminated to RG58C/U- 1ft

TNC male to BNC female adapter- 1

Relocation mount with hardware- 1


The TPA pack frame is a 2 piece frame that is secured to the radio via the 4 side chassis mounting holes.  The frame is CNC laser cut from 5052 aluminum and powder coated with a matte black finish.  The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.


Length -  12.750 in

Depth  -   2.500 in

Weight, approx.- .750

Relocation Mounts are 1 inch in depth and will add an additional 1-2 inches to overall depth, depending on placement. 


Frame- 5052 aluminum, 1/8"

Finish- powder coat, matte black