*Base Package only includes the items listed in the description below
*Does not include rear RF adapters or coax. RF adapters and coax can be sourced thru various online vendors.
* Digirig users- You will not need the Data Relocation Package if you're running the DigiRig affixed to your TPA. The suggested installation is to utilize the appropriate cabling offered from DigiRig for your radio and dress the excess cable into the open area at the rear of the TPA.
The TPA pack frame is a 2 piece frame that is secured to the radio via 4, side chassis mounts. The frame is CNC laser cut from 5052 aluminum and powder coated with a matte black finish. The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.
Note- the rubber pads at the bottom rear of the radio will need to be removed.
The radio's grab handle can be affixed to the TPA but you may have to utilize the original mounting screws provided with the radio.
Dimensions
Length - 13.750 in
Depth - 4.000 in
Weight- 1.750 lbs
Relocation Mounts are 1 inch in depth and will add an additional 1-2 inches to overall depth, depending on placement.
Materials
Frame- 5052 aluminum, 1/8"
Relocation mounts- 6061 aluminum
Weight, approx.- 1.750 lbs, fully dressed with all package options
Finish- powder coat, matte black
Basic package includes the following-
TPA-991, 2 piece pack frame
M4-0.7 x 10mm socket head screws- 4, these mounting screws are the appropriate length to avoid damaging the radio's internals. Not to be installed without TPA pack frame.
